Check for excessive snow on roof and arrange for removal if necessary
Clean or replace furnace filter
Check and clean the heat recovery ventilator (HRV); wash or replace the filter;
Clean humidifier and check for condensation and proper humidity levels
Check and reset ground fault circuit interrupter (GFCI)
Test smoke alarms and carbon monoxide detectors
January
Clean or replace furnace filter
Check and clean the heat recovery ventilator (HRV); wash or replace the filter;
Check furnace fan belt for wear or looseness
Check water heater for leaks
Check or clean exhaust fans
Clean humidifier and check for condensation and proper humidity levels
Remove snow and ice from roof overhang/vents
Check and reset ground fault circuit interrupter (GFCI)
Test smoke alarms and carbon monoxide detectors
February
Clean or replace furnace filter
Check and clean the heat recovery ventilator (HRV); wash or replace the filter;
Check and ensure air intakes and exhausts are clear of snow
Remove snow and ice from roof overhang/vents
Check and reset ground fault circuit interrupter (GFCI)
Spring Home Maintenance Checklist
March
Clean or replace furnace filter
Check air ducts, remove covers and vacuum dust from vents;
Check and clean the heat recovery ventilator (HRV); wash or replace the filter;
Check attic, basement and crawl spaces for leaks or moisture
Check sump pump (if installed) for discharge
Clean humidifier and check for condensation and proper humidity levels
Remove snow and ice from overhang and vents
Check and reset ground fault circuit interrupter (GFCI)
Test smoke alarms and carbon monoxide detectors
April
Check eavestroughs and downspouts for debris
Clean or replace furnace filter
Check and clean the heat recovery ventilator (HRV); wash or replace the filter;
Clean humidifier and check for condensation and proper humidity levels
Inspect basement or crawl spaces for leaks or moisture
Check roof for loose or cracked shingles
Check driveways and walks for frost damage
Inspect water heater for leaks
Turn on exterior water supply
Plan landscaping to avoid soil settlement and water ponding
Check and reset ground fault circuit interrupter (GFCI)
Test smoke alarms and carbon monoxide detectors
May
Inspect fences
Check caulking around windows and doors for air or water leaks
Lubricate weatherstripping
Check exterior finishes for signs of deterioration (peeling paint, loose siding, cracks)
Check windows and screens are operating properly
Test septic system and clean if necessary
Check and reset ground fault circuit interrupter (GFCI)
Test smoke alarms and carbon monoxide detectors
Summer Home Maintenance Checklist
June
Check air conditioning to see if properly functioning
Check condition of roof shingles, flashing and chimney caps are sealed properly
Check sheds for wear and tear or damages
Check garage and garage door tracks for deterioration and lubricate bearings
Check sealing around windows and doors for air or water leaks
Test septic system and clean if necessary
Fertilize lawn
Inspect water heater for leaks
Check and reset ground fault circuit interrupter (GFCI)
Test smoke alarms and carbon monoxide detectors
July
Air out damp basements on dry, sunny days
Clean air conditioner
Check or clean exhaust fans
Check water heater for leaks
Check and reset ground fault circuit interrupter (GFCI)
Test smoke alarms and carbon monoxide detectors
August
Clean or replace air conditioner filter
Air out damp basements on dry, sunny days
Inspect driveways and walks for chipping or cracks
Inspect doors and locks for proper closure and locking
Check and reset ground fault circuit interrupter (GFCI)
Test smoke alarms and carbon monoxide detectors
Fall Home Maintenance Checklist
Check eavestroughs/downspouts; remove leaves and other debris
Shut off exterior water supply and drain water lines
Install winter cover for air conditioning unit
Check roofing and flashing for signs of wear or damage
Lubricate rubber or plastic weather stripping around doors and operable windows (replace weather stripping if damaged)
Check caulking for soundness, cracking, detachment and signs of water or air penetration (remove and replace with appropriate type of caulking if necessary)
Clean and test all exhaust fans; lubricate if necessary
